November 18, 2026
How to Reduce FX Fees on International Business Payments
Most businesses know what they pay in transfer fees. Far fewer know what they lose on the exchange rate, because that cost rarely appears as a line on the invoice. It sits inside the rate itself, and on a business that pays suppliers, contractors or subsidiaries abroad every month, it can quietly add up to thousands a year.
This guide shows where FX fees hide, how to calculate what you are really paying against the mid-market rate, and the specific changes that reduce foreign exchange fees for a business, from how you invoice to how and when you convert.
Table of Contents
- What Are FX Fees in International Business Payments?
- How to Calculate Your Real FX Cost
- 7 Ways to Reduce Foreign Exchange Fees for Your Business
- How Echo Money Helps Businesses Reduce FX Fees
- Conclusion
- Related Articles
- Frequently Asked Questions (FAQs)
What Are FX Fees in International Business Payments?
FX fees are everything a business pays to turn one currency into another when it sends or receives money across borders. Some are visible, such as a transfer fee. The biggest one usually is not: the difference between the exchange rate you are given and the real market rate.
These costs matter more than many finance teams assume. In its 2024 survey of payment providers, the Financial Stability Board found that cross-border business-to-business payments for small and medium-sized companies cost an average of 1.6% of the payment value, as reported by the Federal Reserve Bank of Atlanta. The G20 target is to bring the global average down to no more than 1% by the end of 2027, so most businesses are still paying well above where regulators think the market should be.
What Is the Mid-Market FX Rate?
The mid-market FX rate is the midpoint between the price at which banks buy and sell a currency on the wholesale market. It is the rate you see on financial news sites and search engines, and it is the fairest benchmark for any quote you receive.
Almost no one converts at exactly the mid-market rate. Providers add a margin to cover their costs and make a profit. That margin, often called the FX markup or spread, is the part you can negotiate, compare and reduce.
Where the FX Markup Hides
The markup rarely announces itself. These are the places it usually sits:
Inside the quoted rate. A bank or provider may show "no fee" but give you a rate 2% or 3% worse than mid-market. On a $50,000 payment, a 2% markup is $1,000 you never see on a statement.
In a second conversion. Paying a Mexican supplier in pesos from a euro account through a US dollar intermediary can mean two conversions, each with its own margin.
At the receiving bank. If you send US dollars to a supplier whose account is in rupees or pesos, their bank converts the money on arrival at its own rate. You do not pay this directly, but suppliers often price it into future invoices.
In intermediary deductions. On SWIFT payments, correspondent banks can deduct their charges along the way, so the supplier receives less than you sent and asks you to top up the difference.
In charge codes. SWIFT payments carry a charge instruction: OUR (you pay all fees), SHA (fees are shared) or BEN (the recipient pays). Using SHA or BEN on a supplier invoice often leads to short payments and a second transfer to cover the gap.
At checkout. When customers pay by card in their own currency through dynamic currency conversion, a markup is applied before the money reaches you, and higher costs can mean abandoned purchases.
How to Calculate Your Real FX Cost
You cannot reduce what you do not measure, and most providers do not show the markup as a number. The good news is that you can work it out yourself from two figures: the mid-market rate at the time of the quote, and the rate you were actually given.
FX markup (%) = (mid-market rate minus your rate) divided by the mid-market rate, multiplied by 100
Then add any fixed fees to get the all-in cost:
All-in cost = markup amount + transfer fee + any intermediary or receiving deductions
Here is how that looks for a hypothetical US company paying a $50,000 invoice to a supplier in Germany. Assume the mid-market rate is 1 USD = 0.9200 EUR. The rates and fees below are illustrative, not quotes.
Quote A: bank | Quote B: specialist provider | |
Rate offered | 0.9016 EUR | 0.9177 EUR |
Markup against mid-market | 2.00% | 0.25% |
Supplier receives | €45,080 | €45,885 |
Lost to the markup | about $1,000 | about $125 |
Transfer fee | $45 | $15 |
All-in cost | about $1,045 (2.09%) | about $140 (0.28%) |
Note: data here is used for representational purposes. We recommend verifying the latest data from actual sources as it could vary from each country and region.
The bank's $45 fee looks like the main cost, but it is less than 5% of what this payment really costs. If the company makes the same payment every month, Quote A costs about $12,540 a year and Quote B about $1,680.
Two habits make this easy to keep doing:
Log the timestamp and rate of every quote. Mid-market rates move all day, so compare your rate with the mid-market rate at the moment you accepted the quote, not hours later.
Check what actually arrived. Ask key suppliers to confirm the amount credited for one or two payments. If it is less than you sent, intermediary deductions or a receiving bank conversion are adding cost you have not measured.
You can check indicative mid-market rates at any time with Echo Money's currency converter.
7 Ways to Reduce Foreign Exchange Fees for Your Business
1. Stop Converting the Same Money Twice
The cheapest conversion is the one you never make. Many businesses convert every foreign payment they receive into their home currency, then buy that same currency back to pay costs abroad, paying a markup in both directions.
Take a hypothetical Indian agency that earns $40,000 a month from US clients and spends $8,000 a month on US software and contractors. If it converts all $40,000 into rupees and later buys $8,000 back, it pays a markup on $48,000 of conversions. If it holds US dollars in a multi-currency account and pays its US costs from that balance, it only converts the $32,000 it actually needs in rupees. At a 2% markup, that is $320 saved every month, or $3,840 a year, without changing provider.
This is often called a natural hedge: money coming in and going out in the same currency cancels out before any conversion happens.
2. Choose the Invoice Currency on Purpose
When a supplier quotes you in US dollars instead of their own currency, they take on the exchange-rate risk, and they usually price that risk in. A buffer of a few percent added to cover it is common.
Before accepting a dollar price, ask for the same quote in the supplier's local currency, then compare it with what that amount would cost you to convert at your own rate. If a Vietnamese supplier quotes $10,000 or its equivalent in dong, and your provider converts at a 0.3% markup, paying in dong can be noticeably cheaper than accepting a dollar price with a buffer built in.
The same logic works in reverse on your receivables. Customers who can pay you in their own currency, into local account details, tend to pay faster and dispute less. You then decide when and how to convert, instead of leaving it to their bank.
3. Use Local Rails and Set the Right Charge Code
Paying a supplier through a local payment rail, such as SEPA in Europe, ACH in the US, UPI in India or PIX in Brazil, avoids the correspondent banks that take deductions from SWIFT payments. The supplier receives the amount you intended, in their own currency, so there are no short payments or top-up transfers.
When you do need SWIFT, use the OUR charge code for supplier invoices that must be paid in full. It costs a little more upfront but avoids the far more expensive second transfer when a supplier is short-paid. Our guide to SWIFT, ACH and wire transfers explains when each rail makes sense.
Explore Echo Money's cross-border payment infrastructure
4. Match the Pricing Model to Your Payment Size
Providers charge in one of three ways: a fixed fee per transfer, a percentage built into the rate, or a mix of both. Which one is cheaper depends on how large your payments are, and it is easy to work out the break-even point.
Say Provider A charges a $15 flat fee plus a 0.5% markup, and Provider B advertises "no fees" but builds a 1% markup into the rate. The two cost the same at $3,000, because 0.5% of $3,000 equals the $15 fee. Below $3,000, Provider B is cheaper. Above it, Provider A wins, and on a $50,000 payment it saves $235. If your payments are mostly large supplier invoices, "no fee" offers are usually the more expensive choice.
5. Batch Your Conversions, Not Just Your Payments
If your provider charges per conversion, 40 separate supplier payments converted one at a time means 40 fees. Converting once a week into a currency balance, then paying suppliers from that balance, cuts that to four. At $15 per conversion, that is $600 down to $60 a month.
Larger conversions can also unlock better rates, since many providers tier their margins by volume. Ask your provider what volume moves you to the next tier, and plan conversion runs around it. For teams paying many recipients, our guide to mass payouts via API covers how to run batches without manual work.
6. Lock In Rates for Payments You Already Know About
A forward contract fixes today's rate for a payment you will make on a set date, for example a $200,000 equipment order due in three months. It does not make the conversion cheaper. What it does is remove the risk that the rate moves against you before you pay, which can easily cost more than any fee.
Forwards make most sense when your margins are thin, the amount and date are known, and a 3% to 5% currency swing would hurt. For smaller or less certain payments, a limit order, which converts automatically if the market reaches a rate you choose, can be a simpler option.
7. Use Stablecoin Corridors Where They Fit
For some routes, especially from US dollars into emerging-market currencies where bank spreads are wide, stablecoins such as USDC and USDT can be a cheaper path. Dollars are converted into a dollar-pegged stablecoin, moved on a blockchain in minutes, and converted into local currency at the destination.
This works best through a provider that handles both ends, so you are not managing wallets or exchange accounts yourself. Our comparison of stablecoins vs SWIFT for B2B payments explains when the stablecoin route makes sense.
How Echo Money Helps Businesses Reduce FX Fees
Most of the savings in this guide come from three things: seeing the real rate before you pay, converting less often, and using local routes instead of chains of correspondent banks. Echo Money is built around all three.
Before every transfer, Echo Money shows a full breakdown of the amount, exchange rate, fees and what the recipient will receive, and states that it adds no hidden markups to its rates. Businesses can hold balances in multiple currencies, so money received in one currency can pay costs in that same currency without a round trip through the home currency.
For each payment, Echo Money evaluates local bank routes, wallets, SWIFT and stablecoin corridors before choosing the path, across 110+ countries, 70+ currencies and 215+ local payment methods. Suppliers and contractors are paid in their own currency through domestic rails such as UPI, SEPA, PIX, SPEI and GCash, and where it fits the route, USDC and USDT corridors can be used to settle across borders in minutes.
Talk to Echo Money about lowering your FX costs
Conclusion
The biggest FX fee most businesses pay is the one they never see: the gap between the rate they are given and the mid-market rate. Measuring that gap for every payment is the first step to cutting it.
From there, the biggest savings usually come from structural changes rather than haggling over transfer fees: holding the currencies you both earn and spend, choosing invoice currencies deliberately, paying through local rails, matching the pricing model to your payment sizes, and converting in planned batches. For payments you already know are coming, forwards add certainty, and for some corridors, stablecoins add a faster and cheaper route.
Together, these changes can bring a business's FX costs well below the 1.6% average that smaller companies still pay today.
Related Articles
Frequently Asked Questions (FAQs)
How can a business reduce foreign exchange fees?
Measure the markup on every payment against the mid-market rate, hold currencies you both earn and spend, pay through local rails, and batch conversions. Switching to a provider with transparent rates usually delivers the biggest single saving.
What is the mid-market FX rate?
It is the midpoint between the buy and sell prices of a currency on the wholesale market, and the fairest benchmark for comparing any exchange rate you are quoted.
How do I avoid an FX markup?
Compare every quote with the mid-market rate at the same moment, ask providers for an all-in quote, and avoid unnecessary conversions by holding foreign currency balances.
How much do banks charge for currency conversion?
It varies by bank and currency, but markups of a few percent over the mid-market rate are common, on top of any fixed transfer fee. Calculate the markup yourself using the formula in this guide.
Are "no fee" international transfers really free?
Rarely. Most "no fee" offers build their margin into the exchange rate, which can cost more than a fixed fee on larger payments.
Do forward contracts reduce FX fees?
Not directly. A forward contract fixes the rate for a future payment, which protects you from currency moves, but the rate still includes the provider's margin.